Konica Minolta magicolor 1600W - Manual (Page 15)

About the Control Panel 1-6
About the Rotate Toner KEY
The Rotate Toner key allows you to switch the printer from normal operation
mode to Change Toner mode, Eject All Toner mode or Print Head Cleanup
mode.
The mode that the printer enters depends on how long the Rotate Toner key
is held down.
"
When the printer is switched to any of these operation modes, the
magenta toner indicator lights up.
The Rotate Toner key is used in the following situations.
„ When replacing a toner cartridge
„ When removing all toner cartridges
„ When cleaning the print head window
When replacing a toner cartridge
Press the Rotate Toner key.
The printer enters Change Toner mode.
"
For details on replacing a toner cartridge, refer to “Replacing a Toner
Cartridge” on page 5-5.
"
To return to normal operation mode from Change Toner mode, press
the Clear key.
Length of time that
the Rotate Toner key
is held down Mode that the printer
enters Indicators on the
control panel
Less than 5 seconds Change Toner mode -
5 to 9 seconds Print Head Cleanup
mode All indicators blink once
after the key has been
held down for 5 sec-
onds.
More than 10 seconds Eject All Toner mode All indicators flash once
after the key has been
held down for 10 sec-
onds.