Konica Minolta magicolor 1600W - Manual (Page 97)

Indicator Messages 7-10
* Differs depending on the toner status.
Service Message
This message indicates a more serious fault that can only be corrected by a
customer service engineer.
Off Rapid
blinking * TRANS-
FER JAM,
FUSER
JAM, OUT-
PUT JAM /
OPEN TOP
COVER Media jam Clear the jam, close
the covers, and then
continue with the
print job.
PROCESS
ERROR
-BELT,
PROCESS
ERROR-
IDC Process error Open and close the
printer’s covers.
If the error is not cor-
rected, turn off the
printer. After a few
seconds, turn on the
printer.
Off On All blinking I/C LIFE
END
Imaging cartridge
end Replace the imag-
ing cartridge.
Ready
indicator
(green) Error
indicator
(orange) Toner
indicator
(orange) Display of
Remote
Panel
Utility Condition Action
Rapid
blinking Rapid
blinking All blinking SERVICE
CALL
(XXXX)
Fatal error Turn off the printer.
After a few seconds,
turn on the printer.
If the problem per-
sists, contact your
vendor or autho-
rized service pro-
vider.
Ready
indicator
(green) Error
indicator
(orange) Toner
indicator
(orange) Diplay of
Remote
Panel
Utility Condition Action