Konica Minolta bizhub 601 - Manual (Page 177)

751/601 1-164
Setup items by operation 1
!
Detail
The staple function is available only if the optional finisher is installed.
The punch function is available only if the optional finisher and either the punch kit or the z-folding unit
are installed.
The spool function is available only if the optional hard disk is installed.
2-Sided Print Specify whether to perform 2-sided print.
Bind Direction Specify the binding direction.
Staple Specify whether to perform staple. If yes, specify the number of staples.
Punch Specify whether to perform punch.
Number of Sets Specifies the number of copies to be printed.
Default Paper Size Specifies the paper size.
Original Direction Select the original direction.
Spool Print Jobs in HDD
before RIP Select whether to spool a print job to HDD.
Banner Sheet Setting Specify whether to print the first page on the banner page.
Banner Sheet Paper Tray Select the default paper tray used for printing the banner pages.
No Matching Paper in
Tray Setting Specify whether to continue printing from a different paper tray when there is no paper of
the appropriate size in the specified paper tray.
A4/A3 ←→LTR/LGR
Auto Switch
Select whether to print an A4 (Letter)/A3 (Ledger) original in the same size with disregard
to image missing when the Letter (A4)/Ledger (A3) paper tray is selected.
Binding Direction Adjust-
ment Specify the binding direction adjustment method.
Skip Blank Pages A setting is made to decide whether or not the "Skip Blank Pages" is activated. When ac-
tivated, pages with no printing data are not printed.
Date/Time Print Position The print position of the Date/Time is set.
Date/Time Text Size The text size of the Date/Time is set.
Page Number Print Posi-
tion The print position of the Page Number is set.
Page Number Text Size The text size of the Page Number is set.
Insert Sheet Page Num-
bering A setting is made to decide whether or not the page number is printed on the Cover and
the Insert sheet.
Item Definition