Konica Minolta bizhub 601 - Manual (Page 80)

751/601 1-67
Setup items by operation 1
1.21 Printing (IPP)
Specify settings for printing using IPP.
IPP printing is performed via the network using the IPP protocol. Using the HTTP protocol can transfer print
data to the printer on the network, and therefore also enabling output to a remote printer via the Internet.
Specify the settings according to the following flowchart.
2
Note
For details on installing the printer driver, refer to the User’s Guide [Print Operations (IC-208)].
1.21.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2 .
1.21.2 PSWC Settings
On the Administrator Settings screen of the control panel, select [Network Settings] - [4 HTTP Server
Settings].
Specify the following setting.
2
Note
For details on displaying the Network Setting screen, refer to "Displaying the Network Settings
screen" on page 2-2 .
TCP/IP Settings
PSWC Settings
IPP Setting
Allow?
Yes No
IPP Authentication Setting
Finish