Konica Minolta bizhub 601 - Manual (Page 15)

751/601 1-2
Setup items by operation 1
1 Setup items by operation
1.1 Specifying general settings for TCP/IP-based communication
Specify settings to use this machine in a TCP/IP network environment. To use this machine by connecting to
the network, specify these settings in advance.
Network Settings
On the Administrator Settings screen of the control panel, select [Network Settings] - [1 Network Settings] -
[ON].
2
Note
For details on displaying the Network Setting screen, refer to "Displaying the Network Settings
screen" on page 2-2 .
2
Reminder
In order to apply all changes to the network settings, turn off this machine, then on again.
When turning off the main power switch and turning it on again, wait for 10 seconds or longer after
power-off, and then turn on the power again. The machine may not operate correctly if it is turned on
immediately after being turned off.