Konica Minolta Magicolor 2480MF User Manual
Page 101
Advertising
Replacing the Toner Cartridge
89
15
Press the Stop/Reset key.
The message is erased from the display, and machine is reset so that it
can continue printing.
"
If no operation is performed for more than 30 seconds after the
scanner unit is closed, the printer is automatically reset so that it
can print.
"
The machine must complete a calibration cycle (less than 2 minutes)
after a toner cartridge has been replaced. If you open a cover before
the machine is reset, the calibration stops, then starts over again after
the cover is closed.
Advertising