Konica Minolta Magicolor 2480MF - Manual (Page 146)

Solving Other Problems 134
You are
experienc-
ing duplex
problems. Media or settings are
not correct. For autoduplexing, make sure that you
have a duplex option installed.
Make sure that you are using correct
media.
„ See “Specifications” on page 24.
Also, refer to printer. konicaminolta.
com for a complete list of currently
approved media.
„ Do not duplex custom-sized media,
envelopes, labels, postcards, card
stock, letter head, coated paper, or
transparencies.
„ Make sure that you have not mixed
media types in Tray 1.
Make sure the duplex option is
installed and declared in the printer
driver (Device Option Setting tab).
In the printer driver (Setup/Duplex/
Booklet), choose “Short Edge Binding”
(flipped as on a clipboard) or “Long
Edge Binding” (flipped as in a
loose-leaf notebook).
Set duplex (2-sided) copying. For
details on setting duplex (2-sided)
copying, refer to “Setting Duplex
(2-Sided) Copying” on page 69.
For N-up on duplexed pages, choose
Collate only in the printer driver’s
Paper Tab. Do not set collation in the
application.
With N-up on
multiple cop-
ies, the out-
put is
incorrect. Both the printer driver
and the application
have been set for col-
lation. For N-up on multiple copies, choose
Collate only in the printer driver’s
Paper Tab. Do not set collation in the
application.
Symptom Cause Solution