Konica Minolta bizhub PRO C500 - Manual (Page 10)

10
Addition and removal of server
Addition of server (automatic search)
To use the Command WorkStation, a server, that is, the
print controller must be added to the Login Server window.
How to add a server using automatic search is explained
below. When starting up the Command WorkStation for the
first time, perform steps 3 and later by following instructions
on the window displayed after the start-up.
1.
Display the Login Server window.
From the main menu, select [Server], [Login/Logout]
to display the Login Server window.
2.
Click [Add...].
Auto Search tab in Available Servers window is dis-
played and available servers are searched automatically
and listed.
3.
Select the server from the list and then
click [Add].
To add multiple servers:
• Repeat step 3 as many as needed.
If the server you want to add is not on the list:
• Click [Refresh] to perform the auto search again.
• Click [Advanced...] to search by an IP address
range or a combination of IP address and subnet
mask.
• Click [Manual] tab to specify the server.
"Addition of server (manual)" (page 11)
4.
Click [Close].
Login Server window appears and the added server is
displayed on the list. Click the added server name to
login.
Administrator Operator Guest
Reference