Konica Minolta bizhub PRO C500 - Manual (Page 11)

Addition and removal of server (Continued)
11
Addition of server (manual)
How to add a server manually is explained below. When
starting up the Command WorkStation for the first time,
perform steps 2 and later by following instructions on the
window displayed after the start-up.
1.
Follow the steps 1 and 2 in "Addition of
server (automatic search)" (page 10) to
display the Available Servers widow.
2.
Click [Manual] tab.
3.
Select either [Server Name] or [Server
IP address] and then enter the name or
the address.
4.
Click [Close].
Login Server window appears and the added server is
displayed on the list. Click the added server name to
login.
Removal of server
How to remove the added server is explained below.
1.
Display the Login Server window.
From the main menu, select [Server], [Login/Logout]
to display the Login Server window.
2.
Select the server to be removed from
the list and then click [Remove].
The selected server is removed from the list.
Administrator Operator Guest
Administrator Operator Guest