Konica Minolta Magicolor 5450 - Manual (Page 123)

Replacing Consumables 109
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Open the printer’s front cover.
2
Turn the dial to unlock the
waster toner bottle.
3
Pull out the waste toner bottle
and the toner cartridges for
about 10 cm (4").
Lock Unlock