Konica Minolta Magicolor 5450 - Manual (Page 54)

Configuration Menu Overview 40
TRAY 3
TRAY 4
PAPER
SIZE The size of paper loaded in Tray 3 and
Tray 4 is indicated.
This menu item only shows the current
setting. This setting cannot be changed.
PAPER
TYPE Settings ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 3/Tray 4.
TRAY
CHAINING Settings ON/OFF
If ON is selected and the specified paper tray runs
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If OFF is selected and the specified paper tray runs
out of paper, printing stops.
TRAY
MAPPING TRAY
MAPPING
MODE Settings ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL
TRAY
0-9 Settings PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL
TRAY 1 is PHYSICAL TRAY1 . The
default setting for all other trays is
PHYSICAL TRAY2 .
!"
PHYSICAL TRAY3 and
PHYSICAL TRAY4 appear only
if an optional lower feeder unit is
installed.