Konica Minolta Magicolor 5450 - Manual (Page 31)

Using the Postscript and PCL Printer Driver 17
Basic Tab
The Basic Tab allows you to
# Specify the orientation of the media
# Specify the size of the original document
# Select the output media size
# Zoom (expand/reduce) documents
# Specify the paper source
# Specify the type of media
# Specify the number of copies
# Turn on/off job collation
# Save a print job on the printer and print it later (Job Retention)
# Save a confidential job on the printer and protect it with a password
# Print a single copy for proofing
# Send a notification by e-mail when printing is finished
# Specify user information such as e-mail addresses and passwords
# Print on the back side of paper that has already been printed on
!"
Use paper that has been printed on with magicolor 5450.
In addition, the page printed with this setting is not guaranteed.
!"
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
# Print several pages of a document on the same page (N-up printing)
# Specify booklet printing
# Rotate the print image 180 degrees
# Specify duplex printing
# Specify whether or not blank pages are printed (PCL printer driver only)
# Adjust the binding margin (PCL printer driver only)
# Adjust the printing position (PCL printer driver only)