Konica Minolta Magicolor 5450 - Manual (Page 82)

Media Types 68
# Paper that has already been printed on
– Paper that has been printed on with an inkjet printer
– Paper that has been printed on with a monochrome/color laser printer/
copier
– Paper that has been printed on with a heat-transfer printer
– Paper that has been printed on with any other printer or fax machine
# Dusty
# Wet (or damp)
!"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
# Layered
# Adhesive
# Folded, creased, curled, embossed, warped, or wrinkled
# Perforated, three-hole punched, or torn
# Too slick, too coarse, or too textured
# Different in texture (roughness) on the front and back
# Too thin or too thick
# Stuck together with static electricity
# Composed of foil or gilt; too luminous
# Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
# Irregularly shaped (not rectangular or not cut at right angles)
# Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
# Acidic
# Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m 2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity Tray 1
(Manual Feed
Tray) Up to 20 thick stock sheets, depending on
their thickness.
Tray 2/3/4 Not supported
Orientation Face down