Konica Minolta bizhub 36 - Manual (Page 176)

bizhub 42/36 16-5
16.2 Cannot configure the settings/Cannot print according to the settings 16
16.2.2 Others
16.2.3 Error message
Paper is not fed from the speci-
fied paper source. Paper will not be fed from the
specified paper source if that
paper source is loaded with pa-
per of a different size or orienta-
tion. Load the paper of the appropriate
size and orientation into the de-
sired paper source.
The user authentication or ac-
count track setting field is
grayed out and cannot be spec-
ified. User authentication or account
track may be disabled on the
Windows printer driver. In the [Configure] tab, enable user
authentication or account track.
Problem Possible Cause Remedy
Problem Possible Cause Remedy
Cannot install the printer driver. It has already been installed in
Windows Vista/Server 2008 as a
printer compatible with the Web
service print function. If you try to install a printer driver
in Windows Vista/Server 2008 by
use of the Web service print func-
tion, it is recognized as installed
before the actual installation is
completed. Uninstall the printer in
the [Network] Window, and then
install it again.
Message Cause Remedy
[Paper Size Mismatch]
[Load xxx in Tray x or cancel
job.] The paper size specified from
the control panel is different
from the size of paper loaded in
the paper tray. Load paper of the correct size
into the indicated paper tray.
[Paper Setting for Manual feed]
[Load xx xxxx in bypass tray.
Touch [Print]]. If you select [Tray 1 (Manual
Feed)] for [Paper Tray] in the
printer driver, paper is loaded in
the tray 1 when printing is start-
ed. Press the key to print or remove
paper from the tray 1 and load pa-
per in the tray again.
[Replenish paper]
[Load paper in bypass tray or
select other paper tray.] There is no paper in Tray 1 when
printing with Tray 1 selected. Load paper into Tray 1.
[Replenish paper]
[Replenish paper in Tray x or se-
lect other paper tray.] There is no paper in the paper
tray selected for printing. Load the specified paper into a
paper tray.
[Paper Size/Type Mismatch]
[Load the following paper in tray
x.] The type and size of the paper
loaded into all of the paper trays
are different. (when [Auto Tray
Switching] is set to [ON]) Load the specified paper into a
paper tray.
[Memory Full]
[Insufficient memory Cancel the
job.] The print data sent from the
computer has caused the mem-
ory to become full. Cancel the job.
Reduce the amount of data of the
print job and print again.
[Unable to save job.] A job that cannot be saved is re-
ceived. When a user name and a user
password are unmatched, se-
cured jobs cannot be saved.
Input the correct user name and
password and print again.
[Stored Job Error]
[Stored job specification not
correct.] The current configuration of op-
tional devices is different from
the one detected when the job is
stored. Return the configuration of op-
tional devices to the one detected
when the job is stored.
[HDD Capacity Over]
[Insufficient HDD capacity.]
[Delete unnecessary file.] There is not enough space avail-
able on the hard disk. Delete any unnecessary files.