Konica Minolta bizhub 36 - Manual (Page 34)

bizhub 42/36 5-2
5.1 Windows Vista/7/Server 2008/Server 2008 R2 5
5 Manual Installation Using the Add Printer Wizard
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function, without using the installer.
5.1 Windows Vista/7/Server 2008/Server 2008 R2
5.1.1 For network connection (LPR/Port 9100)
In Windows Vista/7/Server 2008/Server 2008 R2, you can install the printer driver either by searching for the
printer on the network, or by creating a new printer port.
Settings for the machine
Before using Port9100 or LPR printing, you must configure the network settings for the machine.
d
Reference
For details on the network settings for the machine, refer to the [User's Guide Administrator Operations].
Installing the printer driver by searching for the printer using the Add Printer
Wizard.
0 Installing the driver to Windows Vista/7/Server 2008/Server 2008 R2-based computers requires the ad-
ministrator authority.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the Drivers CD-ROM into the CD-ROM drive of the computer.
2
Click [Start], and then select [Control Panel].
3
Select the printer functions from [Hardware and Sound].
% In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. When [Control Panel]
is displayed in Classic View, double-click [Printers].
% In Windows 7/Server 2008 R2, click [View devices and printers] under [Hardware and Sound]. When
[Control Panel] is displayed in an icon view, double-click [Devices and Printers].
Items to be configured Description
IP address In [TCP/IP Settings] of the machine, specify the IP address.
RAW port number To use Port9100 printing:
In [TCP/IP Settings], enable the RAW port and specify the RAW port
number ([9100] in the initial setting).
LPD Setting To use LPR printing:
In [TCP/IP Settings] for the machine, enable LPD printing.