3 [general, 4 [image options, General] -5 – Konica Minolta bizhub 36 User Manual
Page 128: Image options] -5
bizhub 42/36
12-5
12.2
Default settings of the printer driver
12
12.2.3
[General]
Reference
-
The [Staple] function is available only if the optional Finisher FS-529 is installed.
12.2.4
[Image Options]
Function Name
Option
Description
[Nearest Size and Scale]
[On]/[Off]
If no paper tray contains paper of the specified size, the
page is automatically enlarged or reduced and paper of
the most appropriate size is selected.
[Resolution]
[High Quality]
Displays the image resolution (High Quality) for printing.
[Paper Type]
Paper types avail-
able for the ma-
chine
Select a paper type to be used for printing.
[Paper Source]
Auto, Tray 1
(Manual Feed),
Tray 1 to Tray 5
Select a paper tray to be used.
Selectable items vary depending on the option installa-
tion status.
[Orientation]
[Portrait]/[Land-
scape]
Select the orientation for the original.
[Manually Print on 2nd
side]
[On]/[Off]
Select whether or not to print on the back side of paper
that has already been printed on.
[Paper Sizes]
The paper sizes
registered as the
standard paper
sizes and custom
sizes that can be
used with the ma-
chine
Specifies the paper size.
[Collate]
[On]/[Off]
Select to collate pages sequentially when printing mul-
tiple sets of copies.
[Binding Position]
[Left Bind], [Top
Bind], [Right Bind]
Specify the binding position.
[Offset]
[On]/[Off]
Select to stagger each set when printing multiple sets
of copies.
[Print Type]
[1-Sided]/[2-Sid-
ed]
Specify 1-Sided/2-Sided print.
To save paper, 2-Sided print is the default setting.
[Staple]
[Off], [Left Cor-
ner], [Right Cor-
ner], [2 Position]
Select to specify stapling.
[Brightness]
[-15%], [-10%], [-
5%], [0%], [5%],
[10%], [15%]
Specifies the brightness of the printing image.
[Edge Strength]
[Off], [Low], [Mid-
dle], [High]
Select to emphasize edges and specify the strength of
the edge enhancement dot to be used.
Select [Low] to use weak edge enhancement dots.
Select [Middle] to use normal edge enhancement dots.
Select [High] to use strong edge enhancement dots.
[Toner Save]
[On]/[Off]
Select this check box to adjust the printing density in
order to save the amount of toner consumed.
Function Name
Option
Description
[Image Halftone]
[Line Art], [Detail],
[Smooth]
Specifies the halftone for printing image.
[Image Edge Enhance-
ment]
[On]/[Off]
Select whether image edges are emphasized.