Konica Minolta bizhub 36 - Manual (Page 60)

bizhub 42/36 6-9
6.2 Selecting and connecting a printer 6
7
Select the desired printer driver manually.
% When OS X 10.6/10.7 is used, select [Select Printer Software...] from [Print Using:], and then select
the printer driver of the desired model name from the list that is displayed in another window.
% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select [KONICA MINOLTA] from the [Print Using:], and then select the
printer driver of the desired model name from the list.
OS X 10.5:
8
Click [Add].
When the selected printer is registered in the [Print & Fax] or the [Print & Scan], the setting procedure
is completed.
% If the [Installable Options] window appears, proceed to change the option settings as necessary.
For details, refer to page 11-3.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
Configuring the IPP settings
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5/10.6/10.7, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].