Configuring the ipp settings, Configuring the ipp settings -15 – Konica Minolta bizhub 36 User Manual
Page 66
bizhub 42/36
6-15
6.2
Selecting and connecting a printer
6
When the selected printer is registered in the [Printer List], the setting procedure is completed.
Configuring the IPP settings
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
From [Show], select [Built-in Ethernet].
4
Click the [TCP/IP] tab.
5
Select the [Configure:] item and configure the settings including the IP address and subnet mask ac-
cording to the settings for the network to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes or Apply configuration changes ] message appears,
click [Apply].
Adding a printer
1
Select [Macintosh HD] - [Applications] - [Utilities] where the driver has been installed, and then double-
click [Printer Setup Utility] or [Print Center] to open it.
2
When the [You have no printers available. ] window appears, click [Add]. When the printer list appears,
click [Add].
% If available printers have already been specified, the [You have no printers available. ] window does
not appear.
3
Select [IP Printing] for the connection method.
4
For OS X 10.3, select [Internet Printing Protocol - IPP] for [Printer Type:].
5
In [Printer Address:], enter the IP address for the machine.
% Leave [Queue Name:] blank.
6
From [Printer Model:], select [KONICA MINOLTA], select the desired model from the list of model
names, and then click [Add].