Konica Minolta bizhub PRO 920 - Manual (Page 15)

Protect and Delete Data After Use 3
bizhub PRO 920 7
3 Protect and Delete Data After Use
Data from each mode (copy / scan / printer) will be temporarily saved in
memory or on the HDD, and it will be deleted unless it is moved to a Box.
Data is compressed using a special method, so it cannot be decompressed
externally.
When deleting compressed data, a part of it will be destroyed or overwritten
to prevent decompression.
- Data saved temporarily in memory will be overwritten by unavailable data
(NA) when the job is interrupted or ended.
- Data saved in several areas of memory will be overwritten simultaneous-
ly.
- Data in the Box will be overwritten when a delete order is issued.
- If data is sent externally, it will be overwritten when the transmission is
complete.
- If the administrator issues a delete order for each Box, it will be overwrit-
ten.