Konica Minolta bizhub PRO 920 - Manual (Page 16)

4 User Authentication in Enhanced Security Mode
8 bizhub PRO 920
4 User Authentication in Enhanced Secu-
rity Mode
4.1 Description of user authentication
In Enhanced Security mode, setting up password conditions will be tougher
to improve security. The administrator should set up a user name and pass-
word required for user authentication, as this is an administrator operation.
User Name: 1 to 64 alphanumerical characters
Password: 8 to 64 alphanumerical characters (case sensitive)
If a wrong password is entered, attempts to re-try cannot be made for five
seconds.
2
Reminder
Do not use your name, birthday, employee number, etc. for a password
that others can easily figure out.
If a password set in normal mode is fewer than 8 characters or more than 64
characters, you cannot use it in Enhanced Security mode.
If this happens, contact the administrator to turn OFF Enhanced Security
mode, and set a new password following the above conditions.
Even after a successful access has been made, authentication with user
name and password will be required under the following conditions.
-
The main power switch is turned off.
- The sub power switch is turned off.
- The [Access] key on the control panel is pressed.
- The [Copy]/[Scan]/[Box] key on the control panel is pressed, when the
User/Account Authentication Connect is turned on.
- The [Job List] key on the touch panel is touched, when the User/Account
Authentication Connect is turned on.
- The auto reset function operates.