Konica Minolta bizhub PRO 920 - Manual (Page 26)

4 User Authentication in Enhanced Security Mode
18 bizhub PRO 920
– To change the account name, touch [Account Name] on the User
Registration Screen. Touch the desired account key to highlight it.
Touch [OK] to return to the Change Registered User Data Screen.
9
Specify the usable function.
To prohibit a specific function, touch the key on the Change Registra-
tion User Data Screen to release the highlight.
10
Touch [OK].
When settings are completed, touch [OK] on the Change Registered
User Data Screen.
The User Authentication Setting Screen will be restored.
4.4 To delete a user
Follow the procedure below to delete a user name, password, and also Per-
sonal Folder.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are en-
tered and the [OK] is touched, the warning message “Password does not
match” will appear, and no key will work for five seconds. Enter the right
password after five seconds.
If authentication fails, the information will be saved in the audit log.
Procedure
1
Press [Utility/Counter] on the
control panel.
The Utility Screen will be dis-
played.