Konica Minolta bizhub PRO 920 - Manual (Page 3)

bizhub PRO 920
Security
User’s Guide
The Control Software version is as follows.
(This software consists of Image control program and Controller control pro-
gram.)
Image control program (Image Control l1) version:
10-0000, 20-0000, 30-0000
Controller control program (IP Control P) version:
10-0000, 20-0000
About the Firmware version display function:
The bizhub PRO 920 Control Software (Image control program / Controller
control program) version mentioned above can be confirmed by using the
service representative (CE) service mode firmware version display function.
When you display the firmware version, the Image control program and Con-
troller control program versions will be displayed as follows.
Image control program (Image Control l1) version:
2 digits + 4 zeros following the hyphen (Ex: 10-0000)
Controller control program (IP Control P) version:
2 digits + 4 zeros following the hyphen (Ex: 10-0000)
Please keep this in mind when checking the software version.