Konica Minolta bizhub PRESS 2250P - Manual (Page 20)

bizhub PRESS 2250P 2-13
2.3 Administrator Security Functions 2
7
Press [Current Password] to enter the password currently used, then press [OK].
Default password is the main body serial number consisting of 13 alphanumeric characters.
% The main body serial number as 13 alphanumeric characters is displayed on the upper left corner
of the Utility Menu Screen.
8
If the authentication has succeeded, press [New Password] to enter a new password.
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
% You may enter 8 to 32 alphanumeric characters for the HDD lock password.
% If a wrong password or fewer than 8 alphanumeric characters are entered and [OK] is pressed, the
warning message [Incorrect password / Please wait for a while] will appear, and no key will work for
five seconds. Enter the correct password after five seconds.
% The current password cannot be used again as a new password.
% Press [OK] when completed.
9
Press [Input Confirmation] to enter the same password as above.
% Press [OK] when completed.
10
Press [OK] on the HDD Lock Password Screen.
2.3.3 Deleting Temporary Data
Use this function to select whether or not to erase the temporary data on HDD or DRAM in order to prevent
them from being reused. When erasing the data, also select one of the two erase modes provided on the
screen.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.