Konica Minolta bizhub PRESS 2250P User Manual
Page 43
bizhub PRESS 2250P
2-36
2.4
User Authentication in Enhanced Security Mode
2
5
Press [Current Password] and enter the current password corresponding to the user name entered in
step 4.
Press [OK].
The entered password will appear as asterisks (********) on the screen.
% Passwords are case-sensitive.
% If a wrong password or fewer than 8 alphanumeric characters are entered and [OK] is pressed, the
warning message [Incorrect password] will appear, and no key will work for five seconds. Enter the
correct password after five seconds.
6
When user authentication is completed successfully, the Change User Password Screen will be dis-
played.
% Press [New Password] and enter a new password corresponding to the user name entered in step 4.
% Enter 8 to 64 alphanumeric characters for the user password (the alphabetic characters are case-
sensitive).
Press [OK].
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
% The current password cannot be used again as a new password.
7
Enter the new password again for confirmation.
% Press [Input Confirmation] to enter the same password as above.
Press [OK].
8
Press [OK].
The System Setting Menu Screen will be displayed.