Konica Minolta KIP C7800 - Manual (Page 30)

KIP C7800 Touchscreen Software
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
28
Selecting files to be printed
To open the File-to-Print screen select the Print Button.
This will open the File-to-Print screen.
On the left side of the screen select the
desired folder. On the Right side of the screen
select the files to be printed. Doing so will add
the selected files to the bottom section of the
File-to-Print screen. Double clicking a selected
file will view the file.
Note: There is a limit of ten
(10) files that can be
selected at one time. The
following message will
appear when this is reached
To remove files that are not going to be
printed select the Remove Button. This will
allow you to select the files to be removed
from the bottom section of the screen prior to
sending the job.
Select the to proceede to the next step in the File-to-Print process.