Konica Minolta bizhub C451 - Manual (Page 104)

Scanning 2
C451 2-65
3
Touch a destination button to select the address.
The button appears selected, and the destination appears under
“Broadcast Destinations”.
– Multiple destinations can be specified at the same time.
– Additional destinations can be added by directly typing in the ad-
dress.
4
Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-75.
5
Load the document into the ADF or place it on the original glass.
6
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to “Sending after previewing” on page 2-20.
7
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.