Konica Minolta bizhub C451 User Manual

Page 79

Advertising
background image

Scanning

2

C451

2-40

4

Select the destination where the data is to be sent, and then touch
[OK].

To select all destinations, touch [Select All].

To deselect all destinations, touch [Reset].

Additional destinations can be added by directly typing in the ad-
dress.

The button appears selected, and the destination appears under
“Broadcast Destinations”.

5

Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.

For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-75.

6

Load the document into the ADF or place it on the original glass.

7

If desired, press the [Proof Copy] key to check a preview image.

For details, refer to “Sending after previewing” on page 2-20.

8

Press the [Start] key in the control panel.

Scanning of the document begins, and the data is sent.

2

Note

Do not turn off the machine until the scan job is deleted from the Job List
screen.

Advertising