Ipsec sa settings (ipsec settings), Ipsec sa settings (ipsec settings) -34 – Konica Minolta bizhub C451 User Manual

Page 279

Advertising
background image

Network Settings

4

C451

4-34

IPsec SA Settings (IPsec Settings)

A maximum of eight combinations of security protocols and algorithms for
IPsec communication can be stored. Settings can be specified for the follow-
ing.

0 In order to apply the IPsec settings, settings must be specified for “IKE

Settings”, “IPsec SA Settings” and “Peer”.

1

Touch [IPsec Settings] in the TCP/IP Settings screen.

2

To specify settings, touch [ON], and then touch [IPsec SA Settings].

The IPsec SA Settings screen appears.

Parameter

Description

Lifetime After Estab-
lishing SA

Specify the length of time that the key is valid after being generated when
creating communication tunnels.

Security Protocol

Select the security protocol.

ESP Encryption Al-
gorithm

If “Security Protocol” was set to “ESP”, specify the ESP encryption algo-
rithm.

ESP Authentication
Algorithm

If “Security Protocol” was set to “ESP”, specify the ESP authentication
algorithm.

AH Authentication
Algorithm

If “Security Protocol” was set to “AH”, specify the AH authentication al-
gorithm.

Advertising