Konica Minolta PagePro 1390MF User Manual

Page 15

Advertising
background image

15


AVIS:
Le present materiel est conforme aux specifications techniques applicables d'Industrie Canada.
L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a une
interface telephonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, a la
seule condition que la somme d'indices d'equivalence de la sonnerie de tous les dispositifs n'excede pas 5.

- For U.S.A.

FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the cover of this
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
required, this information must be provided to the telephone company.

This equipment uses certification jack USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0).

To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company For products approved after July 23, 2001, the REN for this product is part of the product identifier that
has the format US: US:AAAEQ##TXXXX.. The digits represented by ## are the REN without a decimal point (e.g., 03 is a
REN of 0.3). For earlier products, the REN is separately shown on the label.


If PagePro 1390 MF causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.

If trouble is experienced with PagePro 1390 MF, for repair or warranty information, please contact the Konica Minolta dealer
location where you purchased this equipment. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information. If you home has specially wired alarm equipment connected to the
telephone line, ensure the installation of PagePro 1390 MF does not disable you alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone company or a qualified installer.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of
the business or other entity, or other individual sending the message and the telephone number of the sending machine or
such business, other entity, or individual.

(The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-
distance transmission charges.)


WARNING/CAUTION Explained

WARNING

The exclamation point within an equilateral triangle followed by the word “Warning” is intended to alert the user to the
possibility that a disregard for the warning may result in fatal hazards or critical injuries. Be sure to focus your attention on
the Warning headings when reading the User's Guide.

CAUTION

The exclamation point within an equilateral triangle followed by the word “Caution” is intended to alert the user to the
possibility that a disregard for the caution may result in minor injuries or in physical damage. Be sure to focus your attention
on the Caution headings when reading the User's Guide.

- For New Zealand
1. This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no guarantee that

Telecom lines will always continue to support pulse dialing.

2. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle

or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the
Telecom Fault Service.

3. This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
4. This equipment does not fully meet Telecom's impedance requirements. Performance limitations may occur when used

in conjunction with some parts of the network. Telecom will accept no responsibility should difficulties arise in such
circumstances.

5. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item

complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom,
nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.

6. The automatic calling functions of this equipment must not be used to cause a nuisance to other customers.
7. Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary port is not specifically

designed for 3-wire connected equipment. 3-wire might not respond to incoming ringing when connected to this port.

- For Europe
The Facsimile has been approved in accordance with Council Decision 1999/ 5/ EC for pan-European single terminal
connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on
every PSTN network terminal point.
In the event of problems, you should contact your equipment supplier in the first instance.

(4558-9562-00A)



Advertising