Konica Minolta Magicolor 2550 - Manual (Page 159)

Configuring the Printer 143
Page Orientation Identifies the page orientation that the printer should
use. Choices are
„ Portrait: Vertical orientation (longest side of
media vertical)
„ Landscape: Horizontal orientation (longest side
of media horizontal)
Choices: Portrait, Landscape
Default: Portrait
Configuration Menu Equivalent:
MENU PAPER MENU -
ORIENTATION
Page Recovery When this feature is enabled (On), following the
clearing of a media jam the printer reprints any
pages that did not progress to the output bin when
the media jam occurred.
Choices: Off, On
Default: On
Configuration Menu Equivalent:
MENU PAPER MENU - PAGE
RECOVERY
Tray Chaining Tray Chaining allows the printer to switch from one
paper source to another when the initial paper
source is empty. You can turn Tray Chaining on by
selecting Yes. Selecting No turns Tray Chaining off.
Choices: No, Yes
Default: Yes
Configuration Menu Equivalent:
MENU PAPER MENU - INPUT TRAY
- TRAY CHAINING
"
The optional Tray 2 must be installed to use
this setting. Both trays should also have the
same media size and media type installed
(unless Auto Continue is used - see Auto
Continue for more information).
Item Description