Configuring the printer 192 – Konica Minolta Magicolor 2550 User Manual
Page 208
Advertising
Configuring the Printer
192
SNMP
TRAP
Enable
Trap
If this check box is selected, the Trap parameters
(below the check box) are enabled.
Default: [Not checked]
Community Sets the community of the printer.
Default: public
Trap IP
Address
Sets IP address of the printer.
Default: 255.255.255.255
Submit button
Saves and applies any changes made.
Reset button
If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Item
Description
Advertising