Konica Minolta Magicolor 2550 - Manual (Page 114)

Printing With NetWare 98
– Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Operating Mode: Select Print Server.
– Print Server Name: Specify the print server name created in step
4.
– Print Server Password: Specify only when setting from the Net-
Ware server.
– Print Server Mode: Select NDS.
– Preferred NDS Tree:
Specify the name of the tree that Pserver logs on to.
– Preferred NDS Context:
Specify the name of the context that connects to Pserver.
– Print Server Polling Rate: Specify 1. (Change as necessary.)
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 5.x/6 Novell Distributed Print Service
(NDPS)
"
Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
"
Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you will
create the printer agent, and then click NDPS Printer on the Create sub-
menu.
4
In the NDPS Printer Name box, enter the printer name.
5
In the Printer Agent Source column, select Create a New Printer
Agent, and then click the Create button.
6
Check the printer agent name, and then in the NDPS Manager Name
box, browse through the NDPS manager names, and register one.