Konica Minolta Magicolor 2550 - Manual (Page 80)

Specifying Print Settings 64
Layout
„ Pages Per sheet
Specifies the number of pages to be printed on one sheet of paper. For
example, if 2 is selected, two pages are printed on one sheet of paper.
„ Layout direction
Lets you identify either left-right or right-left logical page direction on the
physical sheet.
„ Border
This prints a border around the image for each of the pages printed on
one sheet of paper when more than one page is printed on one sheet of
paper.
„ Print on Both Sides
Allows you to configure the print job for duplex printing.
This setting is disabled (grayed out) unless an optional duplex unit is
installed.
„ Binding
Determines the orientation of the logical pages on the physical sheet so
the printed media is oriented for binding on the short edge or long edge of
the media.