Aiphone Ja-2hcd - Manual (Page 8)

- 8 -
Transfer a door call
1. While viewing the visitor, press ROOM CALL button. After
pre-tone, call a person desired by voice.
2. At the called stations, after pre-tone, image and audio of door
will be activated.
3. At a responding station press TALK button to reply. When
finished, press TALK at either station.
4. Second person presses TALK once to connect to the door
station. Communicate with visitor. To return to standby, press
TALK button.
7-8
Activating door release
1. Press and hold down DOOR RELEASE button.
2. The door release mechanism will be activated while the button
is pressed.
7-6
Room-to-room communication
1. Press CALL button once. Call by voice to the other inside
station(s).
2. The called station(s) sounds a pre-tone and voice.
3. Press TALK button once, and reply handsfree.
4. When finished, press TALK button once to turn off.
Note: Communication is approx. 1 minute.
7-7
Answering a door call (MANUAL Press to Talk mode)
1. Momentarily press CALL button.
2. Chime tone sounds, and the visitor’s voice is heard. The
monitor turns on with caller’s image. Door call-in LED 1 or 2
is lit.
3. Depress and hold down TALK button for 1 second or more.
4. To transmit, talk while pressing TALK button, and release
TALK button to listen.
5. When finished, press TALK button once to turn off.
Timer; Call-in, 30 sec. Communication, 1 min. (approx.). Press
TALK button to turm back on (if within 30 sec.)
7-5
[1]
[2]
[3] [4]
CALL
[1] [2]
[4]
[1]
CALL
[2]
[3]
[2] [1]
[5] [4] [3]
DOOR
1
2