Aiphone MK-2HCD - Manual

for Optional Functions
MOUNTING INSTRUCTIONS
6-PIN CONNECTOR
0803 A
http://www.aiphone.com/
Printed in Thailand
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE EUROPE N.V., ANTWERP, BELGIUM
■ MOUNTING
1. Take the mounting bracket off of the monitor unit.
2. Cut out the cable knock-out, as shown by the dotted lines.
3. Plug the 6-pin connector into slot.
4. Connect the wires to the terminal block. Attach the protection shield.
5. Attach the mounting bracket to a box. Mount the monotor unit onto the bracket.
1
4 5
1 6 5 4 3 2
2 3
Strip jacket of cable. Put all
the wires neatly into slot to
avoid damage by pinching.
{
{
{
FOR MODELS FUNCTION (WIRE)
MK-1GD, MK-1HD, Ext. device control (Gray)
MK-2MCD, MK-2HCD porch light, etc. (Gray)
MK-2MCD
b1 ∗RY-3DL (Orange)
b2 ∗RY-3DL (Yellow)
MK-1GD, MK-2MCD
VIDEO - (White)
VIDEO + (Blue)