Agilent Technologies Agilent E5250A - Manual (Page 34)

2-2 Agilent E5250A User’s Guide, Edition 11
Installation
This chapter describes requirements to install Agilent E5250A and the tasks for
installation, and is organized into the following three sections:
• “To Inspect the E5250A and Accessories” describes how to inspect the E5250A
when you receive it.
• “Requirements” explains the information required for operating, storing, and
shipping the E5250A.
• “Installing the E5250A” describes how to install the E5250A.
• “Maintenance” describes about performance verification and cleaning.
WARNING The maximum input voltage of the E5250A is ±200 V. And dangerous voltages
may be present at the E5250A output terminals. To prevent electric shock, you
must observe the following safety precautions when using the E5250A.
• Use a three-conductor ac power cable to connect cabinet (if used) and the
E5250A to an electric ground (safety ground).
• If you need to touch the force and guard terminals of the output connector,
turn off the E5250A and discharge any capacitors whenever possible.
• Warn workers around the E5250A about dangerous conditions.