Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 29)

Xerox 4595 Copier/Printer System Administration Guide 1-17
1. Overview
6. Select
Machine Clock /Timers
.
7. Select
Auto Power Saver
, and select
Change Settings
.
8. Using the up/down arrow buttons, configure a power saver
mode migration time from 1 to 240 minutes, in 1 minute
increments.
•
From Last Selection to Low Power Mode:
Set the time
to move to the
Low Power Mode
after the last operation.
NOTE: The default for From Last Selection to Low
Power Mode is 15 minutes.