Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-16179 - Manual (Page 16)

Installation Using the lpr Utilities for DOS and UNIX
1-6
Verify installation
To test this setup at the client, perform the following steps:
1. Check the status of the queues to verify that queuing and
printing are enabled. This can be done using the following
command:
lpc stat proofqueue
The following information is displayed:
Figure 1-1. Queue status
2. Submit a job by entering the following command:
lpr -P proofqueue /etc/printcap
3. Enter the following command to verify that the print job
reached the queue:
lpq -P proofqueue
NOTE: For more information about the available options for the
Xerox printer, please see the “Using the lpr utilities“ chapter in
this guide.