Xerox DocuColor 7002-8002 con Xerox EX Print Server-16450 - Manual

Customer Release Notes
FreeFlow Express to Print, Makeready, Process Manager,
Web Services, Print Manager, and Output Manager, version 8.0
for the Xerox EX Print Server, Powered by Fiery, version 1.0
Part Number: 45087621
15 September 2009
Copyright 2009 © Electronics for Imaging, Inc.
This document contains information about the installation and use of FreeFlow Express
to Print, Makeready, Process Manager, Web Services, Print Manager, and Output
Manager, version 8.0, for the Xerox EX Print Server, Powered by Fiery, version 1.0.
The term “EX8002” is used to refer to the Xerox EX Print Server, Powered by Fiery,
version 1.0. The term “digital press” refers to the DocuColor 8002/7002 digital press.
The FreeFlow enablement file is integrated into the EX8002 system software.
The EX8002, version 1.0 fully supports the following Freeflow applications:
• FreeFlow Express to Print
• FreeFlow Makeready
• FreeFlow Process Manager
• FreeFlow Web Services
• FreeFlow Print Manager
• FreeFlow Output Manager
Before printing
Before printing to the EX8002, verify the following:
• EX8002, version 1.0 software is installed on the client workstation. For instructions on
installing and using the EX8002, see the documentation that accompanies the server.
• FreeFlow Express to Print, Makeready, Process Manager, Web Services, Print Manager,
and Output Manager, version 8.0 are installed on the FreeFlow system.
Setting the print path
Use the following procedure to set up a FreeFlow application to print to the EX8002.
T O SET UP A F REE F LOW APPLICATION TO PRINT TO THE EX8002
1 From the FreeFlow Printer Registration application, select Add.
The Add Printer Wizard dialog box appears.
2 Enter the IP address of the EX8002 and click Identify Configuration to automatically detect
the Printer Model and the Controller/Server Type.