Checking configurations, Checking configurations -8 – Xerox WorkCentre PE120-120i-4396 User Manual
Page 120
Page 9-8
Xerox WorkCentre PE120i System Administration Guide
Ad
min
is
tr
a
ti
on T
o
ol
s
Checking Configurations
Use these instructions to check the configuration settings of the WorkCentre PE120i.
To check the configuration, perform these steps:
¾
Enable CentreWare Internet Services (see “Enabling Internet Services” on page 9-4).
¾
At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
[Properties] tab.
¾
Select the plus symbol [+] to the left of the General Setup folder in the Properties frame.
¾
In the Properties frame, within the General Setup folder, select [Configuration].
The lower pane will show the firmware versions.
Click [Print System Data List] to print this report.
¾
In the upper pane, click the link for the settings that you want to check.
1
2
3
4
5