Cleaning the machine, Cleaning the machine -15 – Xerox 4112-4127 Enterprise Printing System-4612 User Manual

Page 101

Advertising
background image

Maintenance

Xerox 4112/4127 EPS

6-15

User Guide

4.

ReInsert the empty Punch Scrap Container.

5.

Close the Right Cover of the finisher.

Note

A message will display and the machine will not operate if the right cover is open even
slightly.

Cleaning the Machine

1.

Wipe the exterior with a soft cloth moistened with water. If dirt is difficult to remove, try
gently wiping with a soft cloth moistened with a small amount of neutral detergent.

2.

Wipe off any excess water from the exterior with a soft cloth.

WARNING

Before you start to clean the machine, be sure to switch off the power and unplug the machine.
Cleaning the machine without switching off the power may cause an electric shock.

CAUTION

Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the
machine as doing so may discolor, deform, or crack covers.

CAUTION

Cleaning the machine with an excessive amount of water may cause the machine to
malfunction and/or damage documents during copying.

Advertising