System settings, Fax (phone) – Xerox WorkCentre M24-6082 User Manual
Page 149
System Settings
System Settings
FP1
Fax (Phone)
1.
Press the Access button to enter System Administration Mode.
2.
On the keypad enter [11111] or current password. Touch Confirm when finished.
3.
Touch System Settings.
4.
Touch System Settings, again.
5.
Touch Fax Mode Settings.
6.
Touch Local Terminal Information.
7.
Select the items to enter information and touch Change Settings.
■
Enter in a Local Name, up to 20 characters, then touch Save.
■
Enter a Company Logo, up to 30 characters, then touch Save.
■
Enter a Machine Password, up to 20 digits, then touch Save.
■
Enter G3 Fax ID, up to 20 digits, then touch Save.
■
Enter G3 Dial Type, PB or 10pps, then touch Save.
■
Enter G3 Line Type, PSTN or PBX, then touch Save.
8.
When complete touch Close until the System Settings screen is displayed.
9.
Touch Exit.
to continue on to Address Book:
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/fp1-system-settings.htm [9/4/03 8:33:06 AM]