Acumen Stopwatch - Manual (Page 56)

52
Part II
2. When the stopwatch is stopped ( Optional ):
- Press MODE/NXT Button
D
repeatedly to circle around all modes
mentioned before, plus the Select TZ Mode. You are allowed to re-
select the Target Zone before start a new exercise.
From the Chrono Mode, press MODE/NXT Button
D
two times to return to
the Analog Time Display.
If you do not have a calibrated MET value or put on a HR transmitter, the watch
will only use your pre-set MET value or our default value (Aerobic with Medium
Intensity). Please make sure to re-select your exercise type and intensity every
time with the procedure mentioned above.
However, if you have already calibrated your own MET value and put on a
HR transmitter, the displays of Fluid Loss Setting (Exercise Type and Intensity)
will automatically be turned off as the watch will calculate the best MET value
for you.