Acumen Stopwatch - Manual (Page 64)

60
Part II
LAP LAP LAP
Reset Data
Date of Exercise Display
in Recall Data Mode
No Data
Clear the Memory
You can clear the stored exercise data in the Recall Data Mode when the
stopwatch is stopped. Press & hold STP/RESET Button
C until the watch
sounds two beeps and the "RESET DATA" appears. Press STR Button B
which is indicated by an arrow to clear all exercise data. See the figures below:
C
B
B C
Basic Settings for Exercise
From the Recall Data Mode, after clearing the memory, press & hold SET
Button
A to enter the setting mode (or after quick reset the stopwatch).
Quick Reset Stopwatch & Entering Basic Settings
At any time from the real time display in Recall Data Mode, press & hold
SET Button
A will enter the Reset Stopwatch Mode and the "RESET" is
displayed for indication. Press STR Button B will reset the stopwatch,
store the current exercise data and enter the Basic Settings Mode. (If no
button is pressed for 3 seconds it will exit Reset Stopwatch Mode
automatically.)