AEG Eclipse 10 - Manual (Page 12)

8.10 Make an Internal Call (Multi - handset models only)
The system allows an intercom call between any two handsets registered to the same base. It also allows
you to transfer external calls from one handset to another and set up a 3-way conference with two handsets
and an external call.
8.11 Initiate an Intercom Call
t
In standby mode, press .
>Intercom is established immediately if there are only 2 registered handsets.
>If there are more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed.
t
Press the handset number you wish to call or press * to call all handsets.
t
Press on a called handset to answer the internal call, where both internal callers can talk.
t
To end the intercom call, press on either handset.
Note:
t
You can cancel the intercom call before it is answered by pressing
or on the originating handset.
t
If there is no answer from the called handset within one minute, the paging will be cancelled automatically.
t
If no other handset is registered to the base, 4 beeps will be heard and it will return to standby mode.
8.12 Answer an External Call during an Intercom Call
You will hear an alert tone when you receive an incoming external call during an intercom call and you can
choose from the following options:
t
Press to cancel the intercom call and let the handsets receive normal incoming ringing.
t
Press to answer the incoming call and end the intercom call.
t
Press
to answer the incoming call and put the intercom call on hold.
t
When the incoming external call is connected and the intercom call is on hold, press and hold to start
a three-party conference call with both the incoming and the intercom parties.
t
When the handset is connected to an external call, you can press to enter into a three-party conference
call directly.
8.13 Initiate an Intercom during a Call
You can intercom with another system handset during a call, or invite another system handset to join in a
conference call with you and the external caller.
t
During the call, press
to put the external call on hold.
>Intercom is established immediately if there are only 2 registered handsets.
>If there are more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed.
t
Press the handset number you wish to call or press to call all handsets.
Note: If there is no answer from the called handset, or you wish to cancel the intercom call before it is
answered, press
to return to the external call.
t
Press on the called handset to answer the internal call, where both internal callers can talk.
t
When the intercom call is connected, you can choose from the following options on the originating
handset:
>Press and hold for 2 seconds to connect both handsets to the call in conference mode.
>Press on either handset to terminate the intercom on that handset, and leave the external call
connected to the other handset.