Environmental concerns, Removing the shelf holders, Installation of the cleanair control filter – AEG S73400CTS1 User Manual

Page 24: Door reversibility

Advertising
background image

Removing the shelf holders

Your appliance is equipped with shelf retainers

that make it possible to secure the shelves during

transportation.

To remove them proceed as follows:
1. Move the shelf holders in the direction of the

arrow (A).

2. Raise the shelf from the rear and push it for-

ward until it is freed (B).

3. Remove the retainers (C).

Installation of the CleanAir Control filter

The CleanAir Control filter is an active car-

bon filter which absorbs bad odours and per-

mits to maintain the best flavour and aroma

for all foodstuffs without risk of odour cross

contamination.

On delivery the carbon filter is in a plastic

bag to maintain it’s duration and character-

istics. The filter should be placed behind the

flap before the appliance is turned on.
1. Open the flap cover.
2. Remove the filter from the plastic bag.
3. Insert the filter in the slot found in the

back of the flap cover.

4. Close the flap cover.
The filter should be handled carefully so fragments do not loosen from the surface. The fil-

ter should change once every six months.

Door reversibility

In case you want to change the opening direction of the door, contact the nearest After

Sales Service Force. The After Sales Service specialist will carry out the reversibility of the

doors at your cost.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

A

B

C

24

Environmental concerns

Advertising
This manual is related to the following products: