AEG S83600CMM0 User Manual
Page 12
Problem
Possible cause
Solution
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The product temperature
is too high.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
The room temperature is
too high.
Decrease the room tem-
perature.
Water flows on the
rear plate of the re-
frigerator.
During the automatic de-
frosting process, frost de-
frosts on the rear plate.
This is correct.
Water flows into the
refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Products prevent that wa-
ter flows into the water
collector.
Make sure that products
do not touch the rear
plate.
Water flows on the
ground.
The melting water outlet
does not flow in the evap-
orative tray above the
compressor.
Attach the melting water
outlet to the evaporative
tray.
There is too much
frost and ice.
Products are not wrapped
properly.
Wrap the products better.
The door is not closed
correctly.
Refer to "Closing the
door".
The Temperature regula-
tor may be set incorrectly.
Set a higher temperature.
The temperature in
the appliance is too
low.
The Temperature regula-
tor may be set incorrectly.
Set a higher temperature.
The temperature in
the appliance is too
high.
The Temperature regula-
tor may be set incorrectly.
Set a lower temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The product temperature
is too high.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Many products are stored
at the same time.
Store less products at the
same time.
12 www.aeg.com