3 setting and starting a programme, 4 interrupt a programme, 5 cancel a programme – AEG L76675FL User Manual

Page 17: 6 change a function, 7 set the delay start

Advertising
background image

4.

To use liquid detergent, turn the
flap down.

With the flap in the position
DOWN:
– Do not use gelatinous or thick

liquid detergents.

– Do not put more liquid deter-

gent than the limit showed in
the flap.

– Do not set the prewash phase.
– Do not set the delay start func-

tion.

5.

Measure out the detergent and the
fabric conditioner.

6.

Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.

9.3 Setting and starting a
programme

1.

Turn the programme knob. The rela-
ted programme indicator comes on.

2.

The indicator of button

4

flashes

with red colour.

3.

The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.

4.

Set the available functions. The indi-
cator of the set function comes on or
the display shows the related sym-
bol.

5.

Press button

4

to start the pro-

gramme. The indicator of button

4

is on.

The drain pump can operate for
a short time when the appliance
fills water.

The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.

9.4 Interrupt a programme

1.

Press button

4

. The indicator

flashes.

2.

Press button

4

again. The washing

programme continues.

9.5 Cancel a programme

1.

Press button

1

to cancel the pro-

gramme and to deactivate the appli-
ance.

2.

Press button

1

again to activate

the appliance. Now, you can set a
new washing programme.

The appliance does not drain the
water.

9.6 Change a function

You can change only some functions be-
fore they operate.

1.

Press button

4

. The indicator

flashes.

2.

Change the function set.

9.7 Set the delay start

1.

Press button

5

again and again un-

til the display shows the number of
minutes or hours. The related sym-
bols comes on.

ENGLISH

17

Advertising