AEG L76675FL - Manual (Page 29)

10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
WARNING!
Remove all the packaging and
the transit bolts before you install
the appliance. We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
13.3 Positioning and levelling
x4
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibration,
noise and the movement of the appli-
ance when in operation.
ENGLISH
29