AEG DE4003020M - Manual (Page 22)

Use the same oven lamp type.
4. Install the glass cover.
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem Possible cause Remedy
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not
set
Control the settings
The oven does not heat up The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
The oven lamp does not oper-
ate
The oven lamp is defective Replace the oven lamp
Steam and condensation settle
on the food and in the oven
cavity
You left the dish in the oven
for too long
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The display shows “12.00” A power cut Reset the clock
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
WARNING!
Refer to "Safety information" chapter.
The built-in unit must meet the stability requirements of DIN 68930.
22 What to do if…